Charcoal Press Extruder Machine for BBQ

wooden powder briquetting machine
Type: screw briquetting machine
Abrasive size: 30-60mm
Heating ring: 2kw(3pcs)
Capacity: 200-250kg/h
Briquette dimension: 5cm
Shelf structure: Channel steel 5mm
Iron thickness: 3mm
Raw material: biomass wastes

How to make coffee huck charcoal
Final charcoal briquette ( used for BBQ,live fuels,smokeless )

diesel engine wood briquette machine
This series of equipment has large output and low energy consumption, which is more than 50% energy-saving than the old spiral forming machine.

Wood Chip Brick Briquettes Press Machine
This is sawdust briquette making machine.Machine adopt good quality carbon steel,the service life over 10 years.The material can be various biomass,like palm kernel,peanut shell,branch,logs,ect.The material size must less 5mm.If material too big,we will recommend you crusher according to your requirement.Besides the material size must less 5mm,the moisture of material should be 12%.Too wet or too dry will cause bad forming effect.If your material moisture over 12%,we have sawdust drying machine.After crushing,the material was delivery to drying machine,then it was sent to forming machine.

Pini Kay Walnut Shell Biomass Wood Briquette Machine
After putting powdery materials into the machine inlet, the motor drives the screw to rotate to press them into different shapes of six arris or other forms.

sawdust block making machine
General product diameter of 50-60mm, diameter of 15-20mm, square or hexagonal form of a hollow cylindrical.

Diesel type biomass briquette machine
Capaity: 200-220 Kg/h
Condition: New
Warranty: 12 Months
Briquette shape: block or bar blicks briquettes
Raw material: wood waste, agriculture wast
Density of briquette: 0.8-1.4g/cm3
Material moisture: 15-30%
briquette size: 50-80mm

Diesel Wood Screw Briquette Machine for India
The heating section of this sawdust briquette making machine is designed with two heat collars made from thick copper wires and the inside is ceramic.

Briquette Press Machine Machine Plant Line
Briquette maker can be used in producing high quality wood charcoal stick with sawdust, wood chips, branches, crop stalks, sugarcane residue, coffee husk, paddy straw, sunflower stalk, cotton stalks, bamboo dust, palm husk, soybeans husk, tea waste, etc.

wood briquette extruder machine
The equipment adopts a fully automatic electronic control system, and a single person can realize the operation and production of the machine;
The equipment is highly adaptable. It can be adapted to coconut shell charcoal, bamboo charcoal, charcoal powder, straw charcoal powder, etc.

taper sleeve of briquette making machine
Usage: Making Bbq Charcoal Briquette
Keyword: Sawdust Biomass Briquette Making Machine
Type: Machine-Made Charcoal
Capacity: 300-500kg/h

Chip Coconut Shell Corn Cob Wood biomass Briquette machine
The biomass rod making machine can output many shapes of finished products by different shapes of sleeves, and the size of finished products can also be customized as your requirements.

Professional Manufacture Hookah Brick Bagasse Briquette Machine
Voltage: 380V
Power: 22kw
Dimension(L*W*H): according to the type
Weight: 700kg
Features: automatic temperature control
Warranty: 1 year
Diameter of briquettes: 50-80mm
Capacity: 350-400 kg/h
final briquettes shape: cylinder, hexagonal, finger briquettes
Briquette density: 1-1.4 g/cm3

Hexagon shape sawdust briquette making machine
This bio-fuel briquette is 45-80mm in diameter, occurs in the hollow quadrangular or hexagonal cylinder or hollow hexagonal with a 15-20mm inner-hole.

Screw Type Briquette Machine For Boiler BBQ
1. Final shape:hexagon, pentagon, square, round
2. Final length: 20-40 cm adjustable, according to per your needing
3. Final size: Dia. 50mm, 60mm,70mm,80mm

Bio Fuel Briquette Charcoal Production Line
As the need of pollution free environment, the product has a large scope of marketing. The briquettes can be used as a substitute of any fuel in following fields

The production line of bamboo wood sawdust charcoal briquette making machine is to crush the wood firstly, next to dry, and to make briquettes. Then put the materials into the carbonization furnace to get the charcoal rods.

Industrial Briquette Producing Machine
Suitable for pressing various biomass materials, low power consumption and high production efficiency.

Wood Charcoal Briquettes Extruder Making Machine，It is often use industrial boiler biomass sawdust charcoal briquette, use sawdust, branches, rice husk, bamboo shavings, peanut shells, sunflower seed shell, bagasse, corn cob, coconut shell and crop straw as the raw material. After crush,with the machine high temperature. High pressure forming mechanism products, after carbonized become a smokeless charcoal, can use for bbq.

This machine is the main equipment to make stick solid fuel with such wood material as bits of wood, rice shell,coffee husk,peanuts shell, bagasse,etc. The raw material(12% Water proportion) dried by the dryer(12% humidity)will be formed into fuel under high pressure and at high temperature.

jute sticks bamboo bbq briquette wood charcoal making machine
Raw material —–Crusher——Dryer—–Making rods(Charcoal making machine)——Carbonization furnace———Finished product

coconut shell huck makig charcoal for shisha
Briquette machine screw propeller push the material into forming tube.

coconut shell charcoal making machine
This bio-fuel briquette is 40-90mm in diameter,occurs in the hollow quadrangular or hexagonal cylinder or hollow hexagonal with a 15-20mm hole through the body.The bio-fuel carbon maintains the cleanliness and hygiene,and is suitable for family heating and barbecuing.

Nut shell Charcoal Making Machine
Raw material request
Sawdust size: 3-5mm (if the raw material size bigger,a crusher is needed)
Sawdust moisture: 8%-12%(if the raw material moisture is higher than 12%,a dryer is needed)

charcoal making machine from sawdust factory
After the tremendous pressure of this machine, the rods have certain intensity,high density,stable performance,which makes the final product easy to transport and convenient to store.

hard wood coconut shell briquette charcoal machine
coconut shell charcoal machine also called biomass briquette machine and sawdust briquette machine, is used to convert sawdust into charcoal stick as biofuels ,used to heat boiler, fireplace, etc for warm in house.
briquette extruder machine coconut shell charcoal machine is used for change agriculture or forestry waste into solid fuel under the high temperature & high pressure.During the processing ,the materials do not need any binder.

Wood briquette making machine,super september charcoal machine charcoal briquette machine hydraulic charcoal

vulnerable part for sawdust briquette making machine
These are screw propeller, heating ring and forming

charcoal briquette making machine lump charcoal productionon plant
The raw material of the mechanism charcoal is made from the viscosity of wood fiber, and the raw material is heated to a certain temperature. The wood fiber is softened, and then it is cemented into shape, and then the finished product is customer needed.

80mm briquettes for heating
Final Briquette : Specific gravity: 1300-1900kg/m Calorific value: 4500-5000kcal/kg