Hydraulic charcoal Coal dust powder briquette machines

Charcoal stick extrusion coal bar briquette machine bbq
Features of charcoal sticks making machine
1：large feed screw lead,feed fast forward helix lead a small,provincial power.
2：shaft seat and the cylinder rigid connections,high concentricity,anti-thrust, the machine stability.
3：part adopts fault structure should be sealed,dirt missed by a fault at.
4：V-belt drive,smooth operation,low noise,while its role overload.
5：connected with the cylinder head ring structure,bolt structure,according to the user needs to elect their own set.

imple introduction of the coal charcoal briquette making machine:
BBQ Charcoal And Coal Powder Briquette Machine
This coal charcoal briquette making machine can be used to extrude charcoal stick, charcoal bar, biomass stick of different diameters in cylinder or square shape without hole through different moulds from charcoal dust or charcoal powder.

charcoal briquette press machine

rice husk coal dust extruder machine
It has the features of novel design, easy operation and stable performacahrnce.

wood charcoal briquette machine
Features of the coconut charcoal briquette machine:

1. briquetting after carbonizing, the working process is simplified.

2. the service life of wearing parts is up to 4000hours.

3. the electricity cost reduced by 60%.

4. the capacity increases 2-3 times.

5. it is easy to operate.

6. the quality of charcoal is improved.

Coconut Charcoal Briquette Machine

Small capacity charcoal rods forming machine
Any types of charcoal can be used for charcoal bricket making machine to make shisha charcoal, Such as wood charcoal,coconut shell charcoal,bamboo charcoal, also wood,tree branches,coconut shell and etc.We have different production process to deat with the material,then to produce shisha.

barbecue charcoal briquettes machine
The shape of final briquettes can be adjusted. It is up to the shape of mould. Customer can choose the mould

wood charcoal briquette press machine
The raw materials must meet the requirements: moisture 8%-12%, size 3-5mm

Working principle :

coal dust briquette making machine
The raw material that meets the requirements of the rod is placed in the feeding hopper of the equipment, and a high temperature and high pressure zone is formed under the action of the screw propeller and the heating coil, and the loose raw material is processed into a hollow rod body through the forming cylinder through spiral extrusion

sawdust charcoal briquette press machine
This equipment uses sawdust, shavings, wood scraps, branches, rice husks, peanut husks, corn stalks, wheat straw, straw and other crops as raw materials. After extrusion, it is carbonized in a carbonization furnace to become finished charcoal . It is also possible to directly use pulverized coal as raw material and extrude into coal sticks.

charcoal extruding machine coconut shell charcoal powder extruder forming machine
This Coal Briquette Extruder uses the principle of spiral extrusion, compressed the prepared

pulverized coal into a certain intensity of cylinder or plum flower shaped through extruding.

widely used to making coal powder into briquettes for boiler, furnace, home heating, etc.

charcoal briquette extruder machine
Coal and charcoal rods mechanism is used as the charcoal rods can make full use of pulverized charcoal, don’t need adding lime in the production process, reduce the cost of fuel, and improve the calorific value of charcoal, has high economic benefit, the other equipment is small in size, do not need to be carbonized drying equipment, do not need to steam, save investment, reduce the area.

Professional Manufacturing sales shisha charcoal machine
.After changing the mold, the material can be pressed into sheet-like (Ф15-Ф50mm) square, rectangular, ring, diamond, triangle, cylindrical and other geometric products. It can also emboss words, trademarks, patterns and various special shapes.

Coal Charcoal Wood Straw Powder Briquette Pressing Machine
What features of our charcoal Briquette Making Machine?

1. The Coal Briquette Machine is the special equipment for processing the charcoal powder or coal dust into different shape,

different size of charcoal briquettes with the different moulds.

2. It can make the briquettes with Cylindrical, cylindrical hexagon, six prismatic, etc
3. It has the features of novel design, easy operation and stable performance.

coal stick making machine
charcoal briquette extruder machine

Advantage Of Coal Rod Making Machine
1. It absorbs the advanced technique at home and abroad.
2. Innovative design and reliable quality.
3. Key parts are processed by imported high quality materials.
4. High strength and toughness.
5. Temperature control, durability, adaptability.

charcoal extruding machine coconut shell charcoal powder extruder forming machine
Coal Briquette Extruder Characteristics:

1.>Environment- friendly: less smoke, no pollution, fuel made out of biomass and Agro Waste
2.>Economical: Saves Time And Money.
3.>Energy Save : Up to 70 % Cost Saving compared to conventional fuels, like gas,diesel.

4.Ball Briquette Usage:Hotels, Restaurants, Hostels, Hospitals, Jails, Function Halls, Caterers, Sweet

Shops, and Fast Food Centers.

wood charcoal extruder making machine
Total process
(1)Crush your raw material into small pieces(diameter is about 3-5mm).
(2)Dry the material by dryer or dried it in the sun,till the moisture is less than 12%.
(3)Put the material into feed let of briquette machine.
(4)Produce the briquette stick without any additive

coal extruder briquette press machine

Jute Sticks Charcoal Making Machine
can make the shisha cubic charcoal

Charcoal Screw Press Briquette Machine
This product use screw extrusion principle, will be prepared coal powder compressed into a cylinder of a certain intensity or plum blossom shape（Not only the cylindrical or plum flower shape, our mould can be replaced）,It can make full use of pulverized coal, reduce the fuel cost

Coal Dust Briquette Extruder Machine
Application of Coal Dust Briquette Extruder Machine

1. This charcoal dust extruder is mostly used to make coal and charcoal powder into sticks. As the first step to make silver shisha(hookah) charcoal.
2. The shape of the sticks can be designed depends on customers’ requirements.
3. The product made by this machine is no pollution and smoke. It is the most suitable machine for charcoal stick making.

charcoal extruder briquette machine
Charcoal extruder making machine, which using the principle of screw extrusion to compress the coal powder into a predeter mined shape with a certain intensity. After the coal powder poured into machine chamber,it bears tremendous pressure.With the help of all kinds of shaped molds,it will be shaped into certain shapes.Now, our factory has developed and researched double-head and four-head coal extruder.

Coal Briquette Making Machine

wood charcoal powder briquette machine
It can make the briquettes with Cylindrical, cylindrical hexagon, six prismatic, etc

coal stick making machine
The Coal Briquette Machine is the special equipment for processing the charcoal powder or coal dust into different shape, different size of charcoal briquettes with the different moulds

Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts.

Charcoal Coal Briquette Extruder Equipment
1.The material is transferred to the conditioner by a screw feeder, then the conditioner can make different materials fully mixed.
2.The conditioner plays a key role in softening raw materials by utilizing water or steam.
3.After softening, the raw material is sent by a feeder to the pelletizing chamber. By spinning rollers in the chamber force the material through the holes of the die, thus pellets are formed.
4.After pelletizing, the length of the pellet can be cut according to different user’s request.

Charcoal extruding shaping machine
Innovative design and reliable quality.
3. Key parts are processed by imported high quality materials.
4. High strength and toughness.
5. Temperature control, durability, adaptability.